Views: 4 Author: Site Editor Publish Time: 2023-07-25 Origin: Site
Are you still worried about how to polish the saw blade? Then you can try automatic saw blade grinding machine. Today's saw blade grinding machine is widely used, and it is an indispensable equipment for machining, steel sawing, saw blade polishing and other industries.
Prior to this, the traditional manual grinding of saw blades consumed a lot of energy, life and money, resulting in high product cost. Most manual grinding is unqualified, which will destroy the dynamic balance of the belt saw blade, so the saw blade is easy to swing and run away when in use, resulting in widening the saw gap and wasting materials; After cutting, the surface roughness is large, and the product quality becomes worse. After a period of use, the saw blade will become dull. If you continue to use it, the blade will be cut with low efficiency and poor product quality; Second, it is easy to damage the saw blade, which will seriously pull the belt saw blade. Therefore, it is necessary to repair and grind the sawtooth in time to ensure cutting efficiency and product quality.
Improve efficiency: It can effectively repair the wear and processing damage of circular saw blades, and improve the service life and work efficiency of circular saw blades.
Cost reduction: It can reduce the replacement cost and production downtime caused by the abrasion of circular saw blades, thus reducing the production cost.
Accurate adjustment: The grinding angle and grinding depth can be accurately adjusted to ensure the stability and accuracy of grinding effect.
Safe and reliable: it has strong stability and rigidity, and can bear large grinding force and workload. At the same time, the electrical control system can monitor and adjust the running state of the gear grinding machine to ensure the safety and stability of the grinding process.
1.Before starting grinding, move the grinding wheel motor backwards to avoid encountering it during debugging. Grinding wheel sheet; Mount the saw blade to fix the slide plate → Mount the saw blade → Adjust the push → Move the casserole wheel → Angle the saw blade according to the situation.
2.When debugging, enter the manual interface for debugging, so that the pushed tooth surface is in front of and behind the table. The moving side is parallel. If it is not parallel, swing the side of the saw blade sliding seat according to the situation. To make it parallel. If the tooth is flat, turn the grinding wheel motor to zero, and then turn it to zero. The tooth type in the parameter interface is set to "flat tooth". In the case of left and right teeth swinging grinding wheel Motor 3-5 degrees, set the tooth type to "left and right teeth".
3. Push the teeth and start working after adjustment. The number of grinding teeth can be adjusted according to the number of teeth of the saw blade, (If a saw blade with 60 teeth is used, the number of teeth of the saw blade is set to 60 teeth) After grinding, the setting is completed. The number of teeth automatically stops working.