The diameter of the ball socket on the roller of the ball press machine cannot be too small Most of the ball sockets of the ball press roll are about three centimeters, and of course too large or too small. Do not use roller skins with small ball and socket diameters because they are comple

1. The pressure roller in the wood pellet machine is an important component in the compression chamber. It needs constant rotation to enable the material to be squeezed out of the die hole. However, when the pressure roller is loose, the pressure roller will be The gap between the mold becomes large

Materials: raw materials after pulverizing 25Kg; machine oil 3Kg, mini sand 5Kg (The diameter of sand must be smaller than the hole of mold/matrix). Mix all materials and take a part of them as the washing materials. The weight must be fit for the machine. Washing: Start the machine and put the wa

The biomass pellet machine is based on crop straw or wood chips and is pressed into pellet fuel by biomass pellet machine. Here, we introduce the factors affecting the life of biomass pellet machine:01If the raw material moisture too low, the hardness is too strong, when processing large power consu

Drum Wood Chipper Precautions before production of log chipper as below, pls pay attention for that:1). Clean the work place and around of wood chipper machine.Then make sure there are no nails,iron wire and stone etc, in the raw material. 2). Inspect the oil of the hydraulic pressure and lubricatin