Problems That May Occur During The Operation of The Wood Pellet Machine

Problems That May Occur During The Operation of The Wood Pellet Machine

Wood pellet machine appears the mold or does not produce particles how to do? 

a :① Now for the pellet machine production process will have, steel nails are often stuck, pay attention to, can not use a vise to pull hard, so as not to damage the mold, you need to grind the nail head, play through, and then squeeze.② If there is no grain,a need to add lubricating oil, edible oil can also be painted on the ring mold. Then add wood chips, etc., add construction sand, and repeatedly squeeze for 10 minutes.

b:Check the raw materials, batching the pelletizer steam supply several places. The raw materials are checked to see if there is any difference from the previous batch. If it is obvious, it is necessary to change the formula, if it is the problem of the pellet machine, it needs to be patiently checked from the transmission key, the ring, the die roll gap and other places, the steam supply is also an important issue, according to the quality and the amount of addition to adjust from the beginning. To adjust the machine in time.