Views:5 Author:Site Editor Publish Time: 2018-12-19 Origin:Site
The diameter of the ball socket on the roller of the ball press machine cannot be too small
Most of the ball sockets of the ball press roll are about three centimeters, and of course too large or too small. Do not use roller skins with small ball and socket diameters because they are completely unusable.
As for why the diameter of the ball and socket of the ball presser can not be too small? Among our actual customers, some of our old customers require custom-made ball sockets of about one centimeter. After the production, our staff followed the scene to help them test the machine. After the start of the test machine, there was a problem: since the ball socket was too small, it was easy to demould after pressing.
This problem is more serious. This is the case when the test is performed several times. Therefore, the staff considered to use the dry powder to squeeze the surface of the ball to smooth the surface of the ball to achieve the effect of not easy to release the mold, but the rotor broke at the same time as the extrusion, because the force is too large, the rotor can not bear . For these reasons, the output is very low, and it is prone to failure, and the molding rate is not high, and half of the finished product often occurs. In this case, it can be said that the diameter of the roller of the ball press machine is too small, and the working efficiency of the whole machine cannot be effectively ensured, and many problems arise.