Views:8 Author:Site Editor Publish Time: 2018-12-15 Origin:Site
1. The pressure roller in the wood pellet machine is an important component in the compression chamber. It needs constant rotation to enable the material to be squeezed out of the die hole. However, when the pressure roller is loose, the pressure roller will be The gap between the mold becomes larger and the pressure is reduced, so naturally it is not possible to discharge smoothly.
2. The motor of the wood pellet machine needs a certain voltage to work normally. If the voltage is too low, even if the motor can rotate it, the power generated is not enough to quickly extrude the material in the compression chamber. There will be a large amount of material clogging in the compression chamber, affecting production.
3. In the production process of wood pellet machine, the speed of the material being pressed out is too slow or the hole of the mold hole is blocked, which may cause the wood pellet machine to press out the material barrier. Thus, a large amount of material is blocked in the compression chamber, so that the wood pellet The machine can't stop.
4. When the main bearing of the wood pellet machine is damaged, it will also make the pressing parts in it not work. A large amount of material will not be discharged in the compression chamber, and it will be blocked.