Double tooth roller tree peeling machine

Introduction:
Wood barker is new generation wood peeling equipment with high efficiency which was innovated by our factory on the basis of foreign advanced technology. It had single and double roller type according to different wood with different diameter. This machine adopts open groove peeling room, the wood come into the peeling room from one side and come out from the other size. So it is continuous working. It conquers the defect of rolling drum and improves capacity greatly. It is suitable for big diameter wood and large scale factory.

1. This machine is the rotor teeth with stripping produced a unique force, so that wood in the hopper tank plate section of a  recurring cycle of movement, but also around its own axis to do wood turning motion segment and irregular beating. To this paragraph with wooden teeth, paragraph wood and keep the friction between the storage tank, impact, compression, and fast bark are separated, to achieve effective peeling effect.

2. One end to put in and the other for outlet, it’s better than the rotary one which have to stop the motor to take the peeled trees out

3. Can suit for many kinds of different trees, especially for the bend one have higher peeling rate than the traditional rotary type

4. The actual power consumption and the failure rate is small and with low noise,

Technical data:
                                                                                                                                                                                                                                                                                                               

MODEL	Wood Length        (mm)	Stripping Diameter        (mm)	Power (kw)	Machine Size (m)	Weight         (kg)	Remark
LB-Z160	0.7-1.2	30-160	5.5+2.2	1.7x1.3x1.4	980	Not include        belt conveyor
LB-Z600	1.0-5.0	30-300	15x2+2.2	6.0x1.6x1.5	4860	include discharge        belt conveyor
LB-Z700	1.0-7.0	40-350	22+3.0	7.2x1.8x1.9	4800	include discharge        belt conveyor
LB-Z800	1.5-8.5	40-400	22+3.0	9.2x1.9x1.9	8850	include discharge        belt conveyor
LB-Z1000	1.0-6.0	40-1100	30+3.0	7.0×1.6×1.7	4800	include discharge        belt conveyor

Wood debarking, wood peeling machine

1. This machine is the rotor teeth with stripping produced a unique force, so that wood in the hopper tank plate section of a recurring cycle of movement, but also around its own axis to do wood turning motion segment and irregular beating. To this paragraph with wooden teeth, paragraph wood and keep the friction between the storage tank, impact, compression, and fast bark are separated, to achieve effective peeling effect.

2. One end to put in and the other for outlet, it’s better than the rotary type which have to stop the motor to take the peeled trees out

3. Suit for many kinds of different trees, especially for the bend one have higher peeling rate than the traditional rotary type

4. The actual power consumption and the failure rate is low and with low noise

Single Tooth-roller:




Machine in production:


Discharging outlet:


Discharging belt conveyor:


Double tooth roller: