loading
LBMY
LEABON
Big Diameter Logs Multi Rip Saw with Long Feeder
Introduction
1.Machine cabinet: adopt thick wall square piping, equilibrium distribution of stress and load. The hole of the transmission system and the spindle surface is formed by one-time wire cutting, molding, ensuring same fatness and vericality!
2.Main shaft: use high quality material, disposable hole, after the quenching and tempering, grinding, chrome plating and dynamic balance treating. it features at high stability, wear resistance and corrosion resistance!
3.Bearing: imported brands, waterproof, ant-tip heating assembly. Long service life, flexible rotation.
Technical Parameter
Model | LBMY15-30 | LBMY15-35 | LBMY20-40 | LBMY25-45 | LBMY30-50 |
Processing length(cm) | More than 100cm | More than 150cm | |||
Minimum processing diameter (cm) | 15 | 15 | 20 | 25 | 30 |
Maximum processing diameter(cm) | 30 | 35 | 40 | 45 | 50 |
Saw blade diameter(mm) | 420 | 480 | 550 | 650 | 700 |
Equipment total power(kw) | 30+37 | 37+45 | 45+55 | 55+75 | 75x2 |
Feeding speed(m/min) | More than 6 meters (variable frequency speed control continuous feeding) | ||||
Feeding method | |||||
Outer dimension(m) | 4.5x1.7x1.7 | 4.5x1.7x1.7 | 4.8x2.7x1.9 | 4.8x2.7x1.9 | 4.8x2.9x2 |
Equipment weight (kg) | 2600kg | 2700kg | 3700kg | 4500kg | 5300kg |
Raw Materials&Final Products
Big Diameter Logs Multi Rip Saw with Long Feeder
Introduction
1.Machine cabinet: adopt thick wall square piping, equilibrium distribution of stress and load. The hole of the transmission system and the spindle surface is formed by one-time wire cutting, molding, ensuring same fatness and vericality!
2.Main shaft: use high quality material, disposable hole, after the quenching and tempering, grinding, chrome plating and dynamic balance treating. it features at high stability, wear resistance and corrosion resistance!
3.Bearing: imported brands, waterproof, ant-tip heating assembly. Long service life, flexible rotation.
Technical Parameter
Model | LBMY15-30 | LBMY15-35 | LBMY20-40 | LBMY25-45 | LBMY30-50 |
Processing length(cm) | More than 100cm | More than 150cm | |||
Minimum processing diameter (cm) | 15 | 15 | 20 | 25 | 30 |
Maximum processing diameter(cm) | 30 | 35 | 40 | 45 | 50 |
Saw blade diameter(mm) | 420 | 480 | 550 | 650 | 700 |
Equipment total power(kw) | 30+37 | 37+45 | 45+55 | 55+75 | 75x2 |
Feeding speed(m/min) | More than 6 meters (variable frequency speed control continuous feeding) | ||||
Feeding method | |||||
Outer dimension(m) | 4.5x1.7x1.7 | 4.5x1.7x1.7 | 4.8x2.7x1.9 | 4.8x2.7x1.9 | 4.8x2.9x2 |
Equipment weight (kg) | 2600kg | 2700kg | 3700kg | 4500kg | 5300kg |
Raw Materials&Final Products